Відео

Thank you. Looks pretty easy.

Thanks for the video and all the close camera angles. Couldn’t have been easy to film in those tight spots, but it was appreciated.

Fantastic reliable car 💪💪💪👍👍👍

Thanks for video

This job sucked, your instructions were helpful, I was able to do it without removing the part you referenced but it wasn’t easy. 15$ part 2 hours labor.

Thanks for your work

How did these hold up? The one thing on my brute is keeping them tight. Pain in the ass.

Thank you bro. Nice view on the video. Really helped me out. You rule

I did not disconnect the airbag or the trunk release. With the glove-box hanging I could easily reach, remove, and replace the carriage.

Excursion owner here giving a big THANK YOU. This will make my life easier.

Great vid thx for the help

Video is making it WAY harder than it needs to be. I took a small screw driver and bent the bottom inch and a half at a 90. You can slip it back behind find the clip and pop the actuator out without having to take all that other crap apart.

Thanks buddy

This is a great video. After doing the cabin filter change numerous times - here are two suggestions. MARK the direction of AIR FLOW of the filter on the white plastic carrier with a SHARPIE. THE AIR FLOW IS DOWN. Do not trust that the person before installed it correctly. You can tell because when the filter is pulled out, the dirt is on top. Also, if you have a helper, you can hold the glove box in place and pull the carrier out, hand it to your helper who can replace the filter in the carrier - and hand it back to you to slide it in. Thus avoiding the elect disconnects.

Thanks man! I spent more time looking for the 10mm in my husband's shop than it took to replace that air filter and put everything back together. You made everything very clear! Super appreciate it!

Great job, thanks!!

thanks Moose

Can you please explain in more detail which wires I need to connect in the 06 dodge ram remote start 🙏

Your video is great! I really appreciate your keeping it informative and concise 👍🏻👍🏻 It helped me realize how much harder it is to change cabin filer in Avalon compared to the Hondas that I’ve done. At almost 70 👵🏻& with mobility issues, I’m gonna let the auto shop do the Avalon!

Thanks for the help. One suggestion: When the glove box is unscrewed and dropped, you can reach in and change the filter without disconnecting the wires and removing the box.

Great video thank you for showing me this.4 I really needed it my fresh air filter was stinking very bad. Know I don't have to worry thanks to you.

Kept wondering what was tripping my low battery warning every time I turned on the AC. The car smelled like how a 19 year old car (‘03) is supposed to smell, but lo and behold with your help I figured out what it was. The owner before me never replaced it in 144,000 miles. It was covered in everything imaginable. There was even a rusty razor blade on it?? Now the light isn’t tripped and the car smells NORMAL and the AC Blows strong again. Huzzah!

How do you install the door lock linkage? It fell off while working on it, it’s still connected to the door lock but it’s not one red to anything? Where snd how do I reinstall? Help!

Thanks man! Have 2001 Toyota Avalon XLS .really appreciate this video

Finally, someone actually showing something that is easy to see. I've got an 2003 with the door ajar issue and have been trying to get info on pulling out the latches, switches and actuators and replacing the whole assembly on all doors. Thanks for the video,

Excellent. Very simple. You the mystery out of this for me. How much do I owe you? Thank you!!

As an option, you can remove the window guide bolt and move the guide out of the way for easier access to the handle bolt so you don't have to use a wrench inside the door cavity. I wish Ford would make these actuators to last. I've replace all mine at least once, although I have had the truck since new in late 2000. Not giving up that 7.3 Powerstroke, though... :-D Good vid, man.

Thank you for video, just changed in my Avalon

Bro your video for the remote start saved my ass 🙌👍

Get further away woncha

Good video thanks

Great video!🚗🚗🚗🚗

Can't you just unhinge the glove box door like on other vehicles, or did Toyota make in a way where you have to remove the whole thing?

Do you have a video about replacing the blower motor in your toyota Avalon?

What about the 2013

Thanks! Very helpful video. Mine is a 2015 and it’s a little different but close. Watching this definitely helped. Appreciate it!!

God damn why is it so much work to get to on this car?

Great job and video

Awesome job concise and to the point. I saw another vid on the same procedure clocking in at over 30 minutes. Galaxies were made faster than that. When I went to change it I figured I could do it on spec but it wasn’t too long before I thought I was working on the space shuttle Thanks for turning it back into a car bro 👍

Thank you

Finally, a video for those of us with Gen 1.0 Super Duty trucks that don't have a big access hole on the inside to get to the latch and actuator.

very helpful, thank you!!

NICE I THINKING OF DOING THAT TO MY 1999 F250

Helped out a lot, thanks!

Thank you sir. I know it's been 3 yrs but I'm doing mine now.

fun place. i live about 4 miles from there. lemme know when yall wanna meet up

I have 2000 Avalon XLS and only had to remove 5 Phillips screws to lower the glove box assembly and was able to replace filter without disconnecting any plugs. I'm glad i didn't see that video cause i would be disconnecting stuff for no reason lol.

Toyota clearly meant to increase revenue in "stealership" service departments with this cumbersome design. Jeesh! I bought a 2004 XLS in Sept 2020 w 146K miles. The older guy had taken excellent care of it as it looks almost brand new. However, the cabin filter had never been changed & was beyond filthy when I changed it. I don't see it mentioned in owner's manual. I'm going to change it again soon.

quick not to much talk...thanks

Did you have to buy the mounting bracket kit?